ALUBOND PV BOOSTER MIRROR  
 
     
 

Photovoltaic (PV) devices have been in existence for several years and the electricity generated by them has been costly in comparison to conventional energy. This problem has been compounded by the shortage of solar grade Silicon which has become expensive.

A solution to this problem was found by developing specialized solar PV reflectors which enable the solar radiation to be concentrated onto a smaller geometric area of Silicon. Using concentrator technology requires a significantly smaller area of costly Silicon while still producing the desired level of power.

Alubond “PV Booster Mirror” (Pantented in USA and Worldwide) is invented, designed and developed in USA by Mulk Enpar R.E’s Khurram Khan Nawab. Alubond PV Booster Mirror reflects the solar radiation and concentrates it to the silicon wafer channeling it into a PV Module which increases their electrical output, while protecting it from the burnout effect which is a serious and frequent issue with PV Module concentrators that result in reducing the life of the PV cells.

Alubond PV Booster Mirror provides cumulative effect on the photovoltaic panel which will enhance the power output without comprising the durability of the PV Panel.

 
   
  ALUBOND UV PROTECTION  
 

Alubond PV Booster Mirror is a reflective metal mirror for photovoltaic (PV) devices which increases the electrical output of the PV panel and cuts out the UV range of radiations in the solar spectrum that cause panel ageing and overheating as shown in figure 1 & 2.

The new surface maintains high uniform reflectivity at visible and NIR wavelength.

 
   
   
 
ALUBOND PV BOOSTER MIRROR ADVANTAGES
  • Highly durable exterior grade core.
  • Light weight
  • Features phenomenal flatness
  • Retains its Shape
  • Low maintenance.
  • Mirrors are mass produced
  • Mirror - Hydrophilic principle (self cleaning property)
  • Easier handling, packing and shipping
  • Unbreakable Mirrors
  • Easy Installation
  • Cut out the IR, UV A,B,C & minimize violet band in visible range.
 
   
 

ALUBOND PV BOOSTER MIRROR APPLICATIONS

 
   
 
DOMESTIC - ROOFTOP PV PANELS SOLAR FARMS MISCELLANEOUS PV APPLICATIONS
 
   
 

HYDROPHILIC EFFECT

 
  SELF CLEANING PROPERTY  
 
Alubond PV Booster Mirror have special innovative coating which uses Hydrophilic Principle in which the physical property of a molecule repels from a mass of water. This was observed when water was placed on the Alubond PV Booster Mirror, water did not form droplets but instead fully wets the mirrors to have self cleaning effects.

To study the effect of this aspect on solar system performance, samples were mounted on a rack outside on a clear night. The next morning, observations were made. As shown in the picture, Alubond PV Booster Mirror hydrophilic samples appeared to be visually clear.
 
   
 
ALUBOND PV BOOSTER MIRROR   GLASS MIRROR