ABTI RENEWABLE ENERGY  
 
     
 

ABTI has diversified in renewable energy sector with a strong presence in solar energy and energy saving lighting products for a wide variety of applications in industrial and domestic arena. The company caters the needs of the global market and has established channel partners in over 20 countries. The Company is today widely diversified with a strong presence in a Solar Energy, Energy Saving Lighting Systems and various other Solar Powered Solutions.

 
ABTI ENERGY SAVING STREET LIGHTS
 
Application - ABTI 236
  Medium traffic roads
  Traffic roundabouts
  Construction sites
  Industrial complexes
  Railway Platforms
  Station Lighting
  Airports
  Civic centers
  Residential Area etc.
 

Type

Street Light

Model

ABTI 236 / 336

Lamp Type

4 pin / Single U

ABTI output (rated light)

8700 + 5 %

Lamp wattage

36 W , 72 W, 144W
Power Consumption 72 / 108 watts + 10%
Working voltage 90 v – 270 Volts

Nominal Voltage

230 volts Ac -50 Hz
Power Factor > 0.98 with (APFC) Active
Power Factor Correction
THD < 10%
Light Output Constant Light Output
Degree of Protection IP 54

Electrical Safety

Class - 1
 
ABTI ENERGY SAVING FLOOD LIGHTS
 
Description ABTI Energy Saving flood Lighting Series

Type

Flood light

Model

ABTI 436
Use Outdoor - Indoor

Lamp Type

4 pin / Single U

Lumens output

11600 + 5%

Lamp wattage

36 Watts x 4
Power Consumption 144 Watts + 12 %
Working voltage 90 Volts to 270 Volts

Nominal Voltage

230 Volts AC-50Hz
Power Factor > 0.98 with (APFC) Active
Power Factor Correction
THD < 10%
Light Output Constant Light Output
Degree of Protection IP 55

Electrical Safety

Class - 1
Dimensions L 610mm x W 510mm x D170mm
   
   
Application - ABTI 436
  Open Areas
  Storage Yards
  Marshalling Yards
  Docks & Port
  Building & Monuments
  Airport aprons
  Sport arena
  Bridges & Flyovers
  Hoarding & Sign board etc.
 
 
ABTI ENERGY SAVING INDOOR LIGHTINGS
 
   
   
   
   
Application
  Reception & Public Services
  Conference Rooms
  Hoarding & Sign Boards
  Corridors & Staircases
  Departmental stores & Boutique

Type

Mirror optic Indoor Fitting

Model

MR 236
Use Indoor

Type of Lamps

Fluorescent / CFLs / T5

Lumens Output

4800 + 5%, 7200 / 8700
Working voltage 90 volts to270 volts

Nominal Voltage

230 volts Ac - 50 Hz
Power Factor > 0.98 with (APFC) Active
Power Factor Correction
THD < 10%
Light Output Constant Light Output
Degree of Protection IP 20

Electrical Safety

Class - 1
 

ABTI SOLAR POWERED LIGHTING SYSTEM

The Solar Home Lighting & portable light ( lantern), Systems offered by ABTI are of high performance, compact ,easy to install. We ABTI harnesses the power from the sun to provide reliable & cost effective Lighting. The System is an excellent trouble free solution for household electrification. The light source is powered by CFLs.
 
APPLICATION
 
Domestic
Remote Villages
Hilly Areas
ABTI Solar Powered Lighting

Type

Solar Powered lighting system

Operation

4 to 5 hours operation
Power source Solar power

Lamp

CFL

Autonomy

3 - 4 Days
 

ABTI SOLAR POWERED STREET LIGHT SYSTEM

 

Solar Street Lighting System is an ideal for lighting streets, squares and cross roads located in areas that are not connected to the power grid.

The standalone solar photovoltaic street lighting system comprises of a CFL as light source, rechargeable battery, PV modules for charging, PWM electronics for the operation of the lamp and safe charging and discharging.

ABTI Solar Street Lighting System is available either with automatic dusk to dawn operation or with a pre-set timer.

ABTI Solar Powered Lighting

Type

Solar Powered Street Light

Operation

12 hours operation
Auto Fully automatic dusk to dawn operation

Power source

Solar power

Lamp

11W, 22W, 44W, 66W
Lumen output 900 + 5% 5400 + 5%
Degree of protection IP 54
Application
  Medium traffic roads
Traffic round abouts
Construction sites
Industrial complexes
Airports
Civic centers
Residential Area etc.
 
PWM CHARGE CONTROLLER
ABTI PWM Charge Controller

Type

Solar Charge Controller

Operation

PWM /MPPT Controller
Auto Fully automatic operation

Power source

Solar power

Voltage

12v / 24v / 36v / 48v
Current 6A to 60 A
Protection Short circuit, Over load, Battery reverse, Temperature Compensation
The solar charge controller uses PWM charging technology, so that as the battery reaches full charge, The PWM pulses slower, gradually tapering off the charge. Low voltage disconnect protects the batteries from severe discharge by shutting off loads before the battery voltage drops to damaging levels. Temperature compensation adjusts the point voltages according to the ambient temperature.
 
 

ABTI LED STREET LIGHT SYSTEMS

 
ABTI Solid State Lighting

Type

LED Street Light

Light Source

Power LED
LED Life >50,000 Hours

Housing Material

Die cast Aluminium Body

Diffuser Material

Toughened Glass
IP Rating IP 64, IP 61 & 54
Beam Angle (X Plane) 120 Deg.
Beam Angle (y Plane) 65 Deg.
Operation By Solar and Mains
Operating Temperature -10 Deg. C to + 55 Deg. C
Wattage 30W, 48W,60W


ABTI Solid state Lighting utilizes the latest ultra High bright Power LED’s combined with special optics to enhance the light output on illumination surface.

This fully integrated system combines the latest and most innovative Micro controller technologies available providing years of convenient and trouble free lighting. powered by solar photovoltaic and also by mains. ABTI Solar Street Lighting System is available with automatic dusk to dawn Operation.

 
Application
  Domestic
Remote Villages
Hilly Areas
 

ABTI SOLID STATE LED LANTERN

 
The Solar portable light ( lantern) , Systems offered by ABTI are of high performance, compact. We ABTI harnesses the power from the sun to provide reliable & cost effective LED Lantern. The System is an excellent trouble free solution for Portable Lighting. The light source is powered by LEDs.
ABTI Solar Powered Lantern

Type

Solar powered Lantern

Operation

15 to 20 hours operation
Power source solar power

Lamp

Power LED

Autonomy

2 - 3 Days
Application
  Domestic
Remote Villages
Hilly Areas
 

ABTI SOLAR ENERGY SAVING LIGHTING SERIES

 
The Solar Home Lighting Systems offered by ABTI are of high performance, compact ,easy to install. We provide reliable & cost effective Lighting in LEDs. The System is an excellent trouble free solution for household electrification. The system is powered by micro controller which enhances the reliability & performance which extends the life of home lighting system powered by LEDs.
Application
  Domestic
Remote Villages
Industries & factory
Offices
Schools & Colleges
Hospitals
ABTI Solar Powered Home Lighting

Type

Solar powered Home Lighting

Operation

4 to 5 hours operation
Power source solar power

Lamp

LED

Autonomy

3 - 4 Days
 
 
 
Solar Powered LED :   Pedestrian Crossing Signal,
       ‘U’ Turns,
                      Left / right Signal
     Blinkers

Type

Solar powered Signals

Operation

12 / 24 hours operation
Auto / Manual Fully automatic operation
Power source solar power

Blinking speed

30 blinks per minute
Signal colour Blueish Green

Signal Size

300 mm dia
Application
  Medium traffic roads
Traffic round abouts
Industrial complexes
Airports
Civic centers
 

ABTI SOLAR POWERED LED TRAFFIC CONTROLLING SIGNAL SYSTEM

 
‘ABTI’ Solar Powered LED Traffic Signal System can also be connected to grid to ensure interrupt free operation. if continuous sunlight is not available during the backup period the connectivity to grid will enable the signal to draw power from the grid and charge the battery.
ABTI Solar Powered LED Traffic Controlling Signal Systems

Type

Solar / Hybride

Operation

12 / 24 hours operation
Auto / Manual Fully automatic operation
Power source solar power / Mains
The system consists

Power

Solar photovoltaic (SPV)
Stand by Mains
Traffic Controller Micro Controller
Storage Power SMF Battery
Autonomy 3 Days
Signal Colour Red, Amber, Blueish Green

Signal Size

300 mm dia
 

ABTI SOLAR STUD

 
Solar Road Stud provides the clear and safe passage for road vision at night for drivers . The stud have a rugged design, which can easily bear the weight of a fully loaded truck or trailer. These studs are completely maintenance free.
 
Solar Stud ADVANTAGES
  LED in Red / Amber color for clear vision
Visibility is minimum 400mtrs at test conditions.
It is with stand all weather conditions with aluminum die cast.
This system is completely waterproof.
35 to 40 flashes per minute.